LOADING
Configurator
The height of each aperture should be measured vertically against the newel post. Start from the underside of the baserail, or from the top of the string if no baserail is installed, and measure up to the top of the handrail.
Taking consistent and accurate vertical measurements ensures a well-aligned and professional finish.
Accurate measurements are essential to ensure your balustrade fits perfectly. When measuring the width of each aperture, always take a horizontal measurement, regardless of whether the staircase is angled. Measure from the inside edge of one newel post to the inside edge of the opposite newel post.
Be sure to double-check your measurements before submitting to ensure a precise and secure fit.
The angle of your staircase is measured from the horizontal plane parallel to the floor up to the underside of the Baserail's end.
Accurately capturing this angle helps ensure components are cut and aligned correctly for a secure and seamless fit.
To measure the floor height for your staircase, start from the horizontal plane or ground floor. Measure vertically up to the floor of the level above, ensuring to include any floorboards in your measurement.
Accurate and consistent measurements are crucial for a precise fit and a professional finish.
Recommended legal pitch: 42°
The desired rise or incline angle for your staircase should be provided in degrees. This is the angle of attack the staircase will follow.
Accurately capturing this angle helps ensure components are cut and aligned correctly for a secure and seamless fit.
The width of your staircase is the desired width of each step/tread no including the string or any additonal components such as the post or balustrade. The provided distance is measured from the internal faces of the string inwards from left to right.
Ensure you have enough space for additional components and features by checking the staircase dimensions provided in the diagram in the final step.
The number of desired treads combined with all other values will determine the going of the generated staircase.
Regulations: Please note that the number of treads may be required to be adjusted along side other parameters upon the final step to ensure that the staircase meets appropriate guidelines and regulations.
Recommended legal pitch: 42°
No turns configured
Turn Statistics
Total Turns: 0
Total Treads: 0
Treads Used by Turns: 0
Available Treads: 0
Need help with your measurements? Contact our team before ordering.
Bill of Materials
Saved Configurations
Additional Information
Add a short description for this tabbed section
Add a short description for this tabbed section